XHORSE XDMQBAGL MQB Adapter for VVDI MLB Tool No Need to Disassemble the Instrument

Product Description

XHORSE XDMQBAGL MQB Adapter for VVDI MLB Tool

Product Introduction: 
XHORSE XDMQBAGL MQB Adapter, with MLB equipment, does not need to disassemble the instrument but only the key, and only needs to solder two wires.
With low risk, simple operation, it can add keys for most MQB48 keys.

Product Features: 
No need to disassemble the instrument
Easier to read key data and add keys

XDMQBAGL MQB Adapter Function: 
Similar to MLB, open the key, read data and program additional key.
This new tool is for MQB48 Megamos AES.
Read immo data (CS code) from mqb working key on the MQB48 platform so can add keys without take the cluster to read on bench.

MLB+MQB adapter instructions: 
Connect to VVDI2 device:
1. Use MLB device + MQB adapter to read IMMO data from MQB48 key.
2. Use VVDI2 to load the IMMO data read in the first step: generate key, learn key (VVDI2 needs to enable MQB function,
does not need MQB48 NEC35XX locking function)

Connect to KEY TOOL PLUS / KEY TOOL MIDI device:
1. The tablet device is directly connected to MLB device + MQB adapter, and IMMO data can be read from MQB48 key.
2. The tablet device loads the IMMO data read in the first step: generate key, learn key
(the tablet device needs to have fourth-generation authorization, does not need MQB48 NEC35XX locking function)

Notice: Recommended customers collect data on a computer instead of using a tablet/key tool plus.

How to connect MQB48 Adapter with MLB Tool? 


MLB Main Unit Upgrade Chip: 
This chip is used to replace the original chip in the MLB main unit.
After replacement, it will work with the information collector. Discard the original chip; no need to retain it.
 
1.Operate Steps:
1). Disassemble the MLB main unit by removing the four case screws.
 
2). Remove the two screws on the circuit board.
 
3). Replace the chip on the circuit board.
 
4). Reassemble the device.

2. Usage Instructions
Key Information Collector:
Must be used with the MLB main unit; it cannot operate independently.
Connecting Cable:
Connect the adapter to the key.
Follow the software instructions to remove the capacitor from the key and solder the connecting cable to the key.
 

Correct Connection Method for MLB Main Unit and MQB48 Key Collector:
Diagrams:
 

Important Notes:
The MQB48 adapter has strict power supply requirements during data collection.
Use two separate USB cables to power the MLB main unit and the MQB48 collector. Do not use charging adapters.
The MLB main unit does not require 12V power.

Data Collection Time:
Good power supply: ~15 minutes for data collection, ~1 minute for immobilizer data calculation.
Average power supply: ~30–60 minutes for data collection, ~1 minute for calculation.

MLB MQB Adapter Connecting to a PC:
Use two USB cables.
 
Connecting to a Tablet:

Label 1: Use a Type-C splitter cable.
Label 2: Tablet power quality is insufficient. For better results, connect the OBD to the vehicle or supply external power to the OBD to maintain tablet battery.
Note: Tablets with a single Type-C port have poor power stability, leading to longer collection times and lower success rates. Strongly recommend using a PC.
After Successful Data Collection:
The MQB48 IMMO data will be generated. Load this data into the MQB35XX option to create and program keys.


Package includes: 
1pc x XHORSE XDMQBAGL MQB Adapter
Shipping Method and Delivery Time:
1)UK/EU/US Warehouse Shipping: 2-5 working days fast ship with No Tax. 
We have stock in our UK/EU/US warehouse for most items.
Items titled "UK/EU/US Ship" are shipped from EU/UK/US warehouse to EU/UK/US Customers. 
2) 4PX Post Shipping: 6-10 working days with No Tax.
The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
3) Yanwen Express Shipping: 10-15 working days with No Tax.
Our company have IOSS, declare under 150 EUR,seller pay tax, customers no need to pay tax.So usually no tax no extra fee for EU customers.
4) DHL/UPS/Fedex Shipping: 3-7 working days. 
For the items have no stock in UK warehouse, we will ship it by DHL.  We will declare a lower price on the invoice to help your clearance. 
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email: Sales@XhorseTool.com

Scan Xhorse QR code to order by mobile phone

Contact information:
Live Support: Chat with us online
Email: Sales@xhorseTool.com
Skype: VVDI2shop.com
Whatsapp/Tel:+86 13343421783

If you have any problems, please do not hesitate to contact us.