Xhorse VVDI2 Key Programmer BMW FEM/BDC Function Authorization Service (with mini condor key cutting machine)



Xhorse VVDI2 Key Programmer BMW FEM/BDC Function Authorization Service
 
This price is for the customers who has mini condor key cutting machine, if you don't have mini condor, please order the SV86-S1 800USD
When finish order, please kindly give us your mini condor key cutting machine SN number and your VVDI2 SN number, this is really important.
 
Notes:
 
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.
then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module,
please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,
but with problem(such as the remote control cannot start the car 
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.