Xhorse VVDI MB BGA Tool Technical Service


Matched product:

V4.8.0 Xhorse VVDI MB Tool Including BGA Calculator Function Multi language

V4.8.0 Xhorse VVDI MB Tool Including BGA Calculator Function Multi language

Latest price:US$2,380.00
US$1,899.0020% off
  • Item No. SK185
  • Free Shipping
1.VVDI MB Tool Key Programmer The latest Software V4.8.0 Firmware V2.0.0. And frequently online update for free
2.Now support all key lost for most Benz cars
3.Mainly used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions

sk185-xhorse-vvdi-user-manual-v1.0.pdf  (2.0M)

Xhorse VVDI MB BGA Tool Technical Service

Xhorse VVDI MB BGA Tool Technical Service

V4.8.0 software download link
Password:123456

1. Attention: All user update device to v2.1.1, the lower version dont support password calculation
2. Add password calculation for lost all key. Support W166, W246, W212, W212(old). After success find password, it will need pay 2 calculation times
3. Password calculation with working key support: add working key test before data acquisition
4. Add EIS status test, working key test function
5. Fix bug for OBD read W203, W639, W463(K) EIS
6. Autodetect W212 EIS with ELV
7. Fix bug for read v51 key password via NEC adaptor
8. Add IR repair key function
9. Bugfix

VVDI Benz BGA tool Feedback: 

Q: suport all key lost?
A: Now support all key lost : w204, w207,W166, W246, W212, W212(old),some W216, W164 2009-

Q: I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect 
16 12v
4+5 GND
14 CAN_L
6 CAN_H
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test? 

A:Read eis via obd for W164, W169, W211, W209, require gateway connected

Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure

A: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success

by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.


Q: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?

A: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success


Feedback from customer:

I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU ??? -read PSW IR - not successful 
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful 
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful 
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful 
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful 
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful 
W203: EIS/EZS A203.545.05.08 - MCU ??? - read PSW IR - OK 
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK 
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful 
W220: EIS/EZS A215.545.02.08 - MCU ??? - read PSW IR - OK 
W220:EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successfulW639: EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful 
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05 
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK

Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom. we have tested W215 ok, but not 
means all W215 can support.in fact only support parts of this type.

please refer to change W204 esl steps:

ESL:Clear TP, Renew ESL(need erase password)
EIS:Renew EIS(need password & erase password)
Write EIS data back,then Personalize W204ESL
 
FAQ:

Q: i tes read data with obd2 210 k line working and 204 car read with obd 2 
but 211 not read with obd2 

cable connect 
16 12v
4+5 GND
14 CAN_L
6 CAN_H
 
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
 
CAN ANY ONE TEST       
                                      
A: it read eis via obd for W164, W169, W211, W209, require gateway connected

Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
A: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success
 
by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.
 
 
Q: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?
A: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success

Customer feedback:

1. I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU ??? -read PSW IR - not successful 
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful 
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful 
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful 
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful 
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful 
W203: EIS/EZS A203.545.05.08 - MCU ??? - read PSW IR - OK 
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK 
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful 
W220: EIS/EZS A215.545.02.08 - MCU ??? - read PSW IR - OK 
W220:EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successfulW639:
EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful 
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05 
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK
 
Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom.
we have tested W215 ok, but not means all W215 can support.in fact only support parts of this type.